How To Fix Windows Update Error 0xc1900223 Problem: There are reports of Windows users who have received Feature Update that fixes Windows 10 Error 0xc1900223 when trying to install Windows update.

This issue typically occurs in the process of installing Windows updates Version 1903 and when the update is at or above 97 percent.

In this article, we are going to discuss the reasons behind this specific problem as well as the options to solve the issue. Windows update Error 030×1900223.

Fixing Windows Update Error 0xc1900223

There are a variety of causes that can trigger Windows update Error Code 0xc1900223 be observed, ranging from issues with the downloading of update files, an issue with the system, or malfunctioning update file in Windows Update components. Other causes could include malware-related issues or corrupt DNS caches, and problems in the host file.

 If you encounter error of the code 0xc1900223 when trying to upgrade the version of your Windows PC with version 1903 you can try the suggestions below to resolve it.

However, before you begin the suggested troubleshooting strategies to this particular issue I would suggest you attempt restarting your PC first. This refreshes your operating system and erases the corrupted temporary data. It is extremely effective in fixing many software-related issues.

To Force the Update, Use the $Getcurrent Folder

When you attempt to install a planned Windows upgrade, Windows 10 will automatically create $GetCurrent and $SysReset folders on the C: drive. The folder will include log files regarding the most recent Windows Update process, but may also contain installation data from the update.

If you’re facing an uninstalled Windows update (which is what happens if you’re getting the error code 0xc1900223)you might be able to force the update installation through the media folder of the $getcurrent folder and then install it by doing it this way.

But, remember that the $getcurrent folder is not accessible by default. Therefore, you’re going be required to open it directly using the address bar or activating hidden folders in File Explorer.

Here’s a simple step-by-procedure guide to force the update through the C folder:

Open File Explorer, and paste the following command in the navigation bar located at the top. Press Enter.


NOTE: Keep in mind that you may have to alter the letter C in order to get the number that corresponds to the present OS drive.

NOTE 2: You have the ability to access this location by yourself by turning off hidden items first (In File Explorer, go to View and select the checkbox for Hidden Items)..

The option to view hidden items is activated.

  • Once you have done this then open the media folder via the list of subfolders, and double-click to launch the start executable.
  • Once you’ve arrived at the screen for updating Follow the prompts displayed on the screen to download the updates by using the specific executable.
  • Once the update has been installed successfully, restart your PC and check whether the issue is fixed on the next system start-up.
  • If there’s a problem and the $getcurrentfolder isn’t visible the possibility is to be that WU was not in a position to update required files to support the installation. If this is the case you can move on to the next possible solution below.

Updating via Media Creation Tool

If the WU feature that is automated cannot update to version 1903 by itself it is possible to use force to install making use of this Media Creation Tool. Along with the ability to completely clean install Windows 10, this tool also comes with an Upgrade this PC Now feature that will enable you to fix the error code error code 0xc1900223.

A number of affected users have reported that this procedure helped them upgrade the Windows 10 build-up to the current.

Here’s a brief guide to the process of updating on Windows 10 version 1903 via the Media Creation Tool:

  • Visit this link ( here) and click”Update Now” to download the Windows 10 upgrade assistant. Downloading the updated executable
  • Once the executable has been successfully downloaded, double-click it and then click “Yes!” in the UAC (User Account Control) to grant administrative access.
  • Then, follow the prompts on-screen to finish the installation.
  • After the operation is completed then restart your computer to determine if the issue will be solved at the next boot. Update to the most recent version with the help of Windows 1 Update Assistant
  • When your computer is booted up, you can check whether the issue has been fixed.

If it happens that the Windows update installation fails with the same error code number of 0xc1900223 errors, move down to the next fix option below.

Disabling Pi-Hole (or a different network-wide adblocker)

As it turns out the error code 0xc1900223error error code that occurs during the installation of an update to Windows 10 update can also be caused by Pi-Hole, or an equivalent network-wide adblocker. According to other users who have experienced the issue the issue could be caused by an DNS blocklist which may cause the update to stop from being completed.

Users who have encountered the same situation have reported that they were able to update the software without experiencing the similar error by deactivating or deinstalling Pi-Hole when the update is in process.


Disabling Pi-Hole Temporarily

Use the Windows keys and R to display the RUN dialogue box. After that you’ll need to type “cmd” in the search box and then hit Ctrl and Shift plus Enter to show the elevated CMD prompt that has admin access. If you’re prompt to do so by UAC (User Account Control), click Yes to give administrative access. Running the Command Prompt

  • Once you’re in your elevated CMD prompt then type the following command to launch the Pi-Hole utility


  • After Pi-Hole has been activated after Pi-Hole has been activated, type in the following command and then press Enter to deactivate it:

pihole disable

After the Pi-Hole adblocker software is disabled, try installing an update which failed once more and see whether you are able to install it without obtaining error code 0xc1900223.

  • If the update was successfully installed, you can run this command inside that same terminal elevated to turn on Pi-Hole once more:

pihole disable

Uninstalling Pi-Hole

  • You can open the Start dialogue box using Windows keys + R. After that you need to type “cmd” into the text box, and then click Ctrl > Shift + Enter to show the elevated CMD prompt. When you see the UAC (User Account Control) prompt you must click “Yes” to give administrative rights. Enter “cmd” into the Run dialog.
  • In this elevated CMD prompt type in the following commands and then press Enter for the purpose of launching the removal of Pi-Hole

pihole uninstall

  • After the command has been successfully processed, you can restart your computer.
  • When the next update is released try to install the update which was not working with the error code 0xc1900223error and check whether the process is completed.
  • If this approach wasn’t suitable or didn’t resolve the issue, go to the next solution below.

Change your DNS resolver

Blocking DNS servers like Pi-Hole may cause error 0xc1900223 or similar. It is necessary to temporarily disable Pi-Hole for the purpose of installing Windows updates.

  • If you have used Pi-Hole at its router, then you’ll be required to switch back to the default DNS or one of the DNS free server (temporarily):

Google Public DNS: i


  • Clear your Windows DNS cache by running the ipconfig/flushdns commands within the Command window.

Be aware that this method will not aid if you’ve got the driver or software that is installed in your computer that’s unsuitable for the version that you’re planning to download. If an update you’re trying to install isn’t compatible with your configuration The following message will appear at your Windows Update settings page:

The known issues with the update have been documented in this page. Windows 10 Version Information Page, 1909 and Windows Server version 1909- Windows Version Information Page.

  • Problems with compatibility need to be fixed prior to trying to install the update by using Windows 10 Update Wizard or the Media Builder. Windows 10 Update Wizard or the Media Builder.
  • Although you can’t install update features (v1903, v1909, etc.) via Windows Update, the Windows Update channel, there are two alternative ways to install them onto your system.
  • Check out this page to download Microsoft Windows 10 download page.
  • Download the most recent version of Windows Update Assistant (preferably) and launch it. Follow the steps to upgrade to Windows 10.
  • Download the tool for creating multimedia for Windows 10 from the Microsoft Windows 10 download page mentioned above.
  • Start the tool for creating multimedia and then select the option to Upgrade This PC Now.

Follow the steps on the screen, and complete the procedure. Be aware that if you choose the “Update Your PC Now, “Update This PC Now” option (on the previous screen), Media Builder will retain the default settings, apps, files, and configurations.

This should allow you to update to your Windows 10 installation without causing error code 0xc1900223.

If the cumulative update (instead of updating features) is causing error code 0xc1900223 it is possible to download the cumulative upgrade locally from the Windows Update directory.